Make your own free website on Tripod.com

Solution Acrylic Resin

Automotive refinish and two pack urethane enamel


These formulations are intended as starting points only. No guarantee of performance is given or implied. All resin formulations must be thoroughly tested and evaluated before attempting production and commercial use.

Home Page

Formula Index

         


A general purpose solution acrylic designed for cross linking in a 2 pack urethane system. Suitable for use as a 2K automotive refinish resin or as a 2 pack polyurethane reaction lacquer.

                 

For use as a baking enamel cross linked with a butylated MF it will be necessary to move the Tg down 8 to 10C to compensate for the increased brittleness.

                

The formula may need to be adjusted to suit your  requirements for your end use. We can reformulate for improved adhesion, gloss, scratch resistance and a range of other properties.  Contact us if you need help.

             

For more information email us on philcov@ak.planet.gen.nz

Phone  +64 9 622-3860

fax      +64 9 634-6100

 

Monomer

Weight

Instruction

Xylene

Methyl Methacrylate

Butyl Acrylate

Hydroxy Propyl Methacrylate

Acrylic Acid

Gentron AZDN

750.00

193.00

157.00

64.00

5.00

7.00

Charge to flask

Heat to reflux

hold 2 hours

Methyl Methacrylate

Butyl Acrylate

Hydroxy Propyl Methacrylate

Acrylic Acid

Gentron AZDN

387.00

313.00

131.00

10.00

15.00

Premix monomers

Dissolve AZDN in monomer mix

Feed to reflux over 4 hours

Gentron AZDN

2.00

Add. Hold 30 min

Gentron AZDN

2.00

Add. Hold 30 min

Xylene

270.00

Cool & Thin

Xylol

Adjust visco & solids

X - Z at 55% NVM