Make your own free website on Tripod.com

Plaster Board Sealer

Water Based Sanding Surfacer


These formulations are intended as starting points only. No gaurantee of performance is given or implied. All Formulations must be thoroughly tested and evaluated before commercial use.

Home Page

Formula Index

         


A water based sealer designed for paper faced plaster board where excellent sanding and topcoat holdout is required.

                 

Designed for use with low sheen topcoats to give excellent holdout over paper and plaster jointing.

                    

The emulsion is designed to give high adhesion and binding in very high PVC coatings.

                    

For more information email us on philcov@ak.planet.gen.nz

or give us a ring on

 +64 9 622-3860     or fax us on

 +64 9 634-6100

Material

Kgs

Instruction

Water

Calgon T

Teric GN 9

Bevaloid 680

AMP 95

Acticide SPX

 200.00

    2.50

    0.60

    1.00

    0.50

    1.90

Premix

Tiona RCL 373

Calcite 50 micron

Talc 50 micron

Mica 20 micron

   40.00

 110.00

 155.00

   33.00

Add with stirring

Stir at fast speed until dispersed.

Natrosol 250 HR

Water

Primal ASE 60

Water

Bevaloid 680

Rheolate 2001

AMP 95

    0.60

    3.00

    3.00

    3.00

    0.50

    4.00

    0.50

Slurry the Natrosol with the water and add with stirring

Premix the ASE 60 with water and add with stirring

Add the remainder with stirring

Emtec 5005

 200.00

Add with stirring

Natrosol Plus

Water

Premix 3:1

Adjust Viscosity  88 - 92 KU